Parker gas stations provide both UHP grade hydrogen gas and zero grade air for flame ionization detectors. The system is specifically designed to supply gas to FIDs and to support flame thermionic and flame photometric detectors. The unit produces zero air by purifying compressed air to a total hydrocarbon concentration of 0.1 ppm or less (measured as methane). The hydrogen generator produces hydrogen gas from deionized water using the principle of electrolytic dissociation of water and hydrogen proton conduction through a proton exchange membrane cell.
Specifications
| Hydrogen Purity: | 99.9995% |
| Zero Air Purity: | < 0.1 ppm total hydrocarbons as methane |
| Max. Hydrogen Flow Rate: | 90 cc/min |
| Max. Zero Air Flow Rate: | 1000 cc/min |
| Power: | 120 VAC/amp, 60 Hz, 480 watts |
| Hydrogen Outlet Pressure: | 60 psig (414 kPa) |
| Zero Air Outlet Pressure: | 40-125 psig* (276-862 kPa) |
| Inlet Connection: | 1/4″ NPT (female) |
| Outlet: | 1/8″ compression |
| Dimensions: | 20″ h x 13″ w x 23″ d (51 cm x 33 cm x 58 cm) |
| Weight: | 53 lb (24 kg) |
*Zero air inlet requires minimum of 40 psig (276 kPa) compressed air pressure.
Features & Benefits
- Single unit produces UHP zero air from house compressed air and 99.9995% pure hydrogen from deionized water.
- Ideal for supplying 1-2 FIDs.
- Eliminates inconvenient and dangerous gas cylinders.
- Silent operation, minimal operator attention required.
- 12-month warranty from date of purchase.
Generator installation, warranty, and service plans are also available through Restek. Contact Restek Technical Service to arrange.
| Weight | 53 lbs |
|---|---|
| Dimensions | 17 × 10.50 × 16.50 in |
Related products
Detector Supplies
FID Collector Nut and Washer, for Agilent 5890/6850/6890/7890/8890 GCs (Both Parts as One Kit)
