Analyze oxygen, nitrogen, methane, carbon monoxide, and carbon dioxide with one column at room temperature. ShinCarbon ST material, a high surface area carbon molecular sieve (~1500 m2/g), is the ideal medium for separating gases and highly volatile compounds by gas solid chromatography (GSC). The rapid, above-ambient analyses these columns provide is a great convenience. Excellent thermal stability of the high surface area carbon, combined with careful conditioning during column manufacturing, ensures low-bleed operation and rapid stabilization when installing a new column. Custom-made ShinCarbon ST columns are available on request.
ShinCarbon ST is a highly stable material. Its 300 °C upper programmed temperature limit minimizes bleed and baseline rise during temperature programming, making the material compatible with most detection systems used for gas analysis, including TCD or HID. All ShinCarbon ST columns are fully conditioned in an oxygen/moisture-free environment for your convenience. This minimizes stabilization time (less than 30 minutes) when installing a new column which, in turn, reduces downtime.
Note: Columns do not include column nuts and ferrules. Optional installation kits can be ordered separately.
Column Configuration Key:
-800 General—General Configuration
-810 Agilent Standard—(HP) 5880, 5890, 5987, 6890, 7890, 8890
-820 Scion (Bruker 430, 450) (Varian Standard—Scion 3700, Vista Series, FID)
-840 PerkinElmer Standard—PE Auto System 8300/8400/8700, Clarus 500
-850 Shimadzu 14A—Shimadzu 14A, 2014
Other column configurations available. If you don’t see the configuration you need listed below, contact your local Restek representative.
Features & Benefits
- Separate permanent gases, including carbon monoxide and carbon dioxide, without cryogenic cooling.
- Rapid separations of permanent gas/light hydrocarbon mixtures.
- Excellent compatibility with most GC detectors—minimal bleed, minimal baseline rise.
- Preconditioned, less than 30 minutes to stabilize.
- Maximum temperature of 280 °C/300 °C.
Installation kit (cat.# 21067) also available.
| Weight | 1 lbs |
|---|---|
| Dimensions | 9 × 13 × 2 in |
| Material | SilcoSmooth Tubing (Siltek-treated stainless steel) |
Related products
GC x GC Selectivity Columns
Rxi-5Sil MS Secondary GC Capillary Column for GCxGC, 2 m, 0.18 mm ID, 0.18 µm
GC x GC Selectivity Columns
Rtx-200 Secondary GC Capillary Column for GCxGC, 2 m, 0.15 mm ID, 0.15 µm
GC x GC Selectivity Columns
Rxi-XLB Secondary GC Capillary Column for GCxGC, 2 m, 0.18 mm ID, 0.18 µm
GC x GC Selectivity Columns
Rtx-CLPesticides Secondary GC Capillary Column for GCxGC, 1.1 m (+ or – 3 cm), 0.10 mm ID, 0.10 µm
GC x GC Selectivity Columns
Rxi-5Sil MS Secondary GC Capillary Column for GCxGC, 2 m, 0.25 mm ID, 0.25 µm